Automatic Liquid Vial Visual Inspection Machine

AvailabilityIn Stock
CategoryInspection Equipment
Payment MethodsCash, COD, DirectDebit
Rated 0.0/5 based on 0 customer review

Automatic Liquid Vial Visual Inspection Machine Details

The automatic vial inspection machine is used in the pharmaceutical industry for inspection and checking of filled vials and ampoules. The machine has a visual vial inspection system with a light screen. It has a spinning assembly with AC drive rejection unit which runs on 24 volt DC. The liquid vial visual inspection machine is used for the visual checking and inspection of glass vials, penicillin vials, syringes, bottles, and cartridges. The machine is also known as the sterile vial visual inspection machine.

Salient Features:

  • The contact parts are made of stainless steel and approved plastic
  • Visibility of six vials at a time
  • Compact injection system
  • High inspection to time transport ratio
  • Adjustable rotation speed of ampoules
  • Equipped with LED and buzzer system for rejection
  • Automatic control system for setting of inspection parameters
  • Repeat cycle facility

Process of operation

The filled vial are fed into the feed section and an index wheel transfers the vial onto a linear transfer track. The spin mechanism spins the vials at a high speed to form a swirl in the fluid and results in the surfacing of impurities. The vials are passed through a light screen so that the impurities are illuminated to the operator in front of the screen. the operator sees them through a magnifying glass. The rejected vials are marked by the operator and then sorts and unload the vials automatically. A numbered light lights up above the magnifying glass indicating the rejected vials. The vials are also sent for a repeat cycle in case a recheck is required. The rejected vials are then transferred to the rejection station where they are ejected out of the machine. The accepted vial are transferred to the collection station where they are collected by a collection tray.

Technical Specifications

Model No.DTNS-V6
Ampoule Size2ml to 30ml
Output Per Hour2000 to 3000 per hour (Depend on size)
FinishStainless Steel Matt Finish
Inspection TypeVisually With Help Of Magnifying Glass
Power Requirements0.75 H.P., 220 Volts, 1 Phase, 50 Hz (Main Machine)
0.25 H.P., 220 Volts, 1 Phase, 50 Hz (Spinning Assly)
Working6 Objects up to 16mm Dia. X 120mm in Height
Operators Field Of Vision1150mm From Ground Leval
Floor Size1600mm (L) X 1000mm (W) X 1600mm (H)
Net Weight550 Kgs. Approx

Request For Quotation
No. 80-D, Zaveri Estate, Kathwada - Singarva Road, Next To Kathwada G.I.D.C.,
Ahmedabad - 382430
Gujarat (India)
Duke Technologies
All rights reserved - Copyright © 2022 - Powered by
Request a Call Back!